We inherited small apartments from Soviet times, in which there is a catastrophic shortage of space.
But the problem can be helped if you install a built-in wardrobe. This type of furniture can significantly save the living space of any apartment or house. You can buy a wardrobe in a furniture store, but if you make it to order, then its convenience and comfort will be much higher.
Custom built-in wardrobes will require its design. And the more carefully the project is thought out, the more convenient the cabinet will be to use. Planning should begin with careful measurements of the place where the cabinet will stand. When measuring, keep in mind that the usable space will be reduced by the width of the track. So the projected cabinet depth of 0.6 meters is reduced by 0.1 meters sliding system. Therefore, the calculations will require laying 0.1 meters more in depth. When installing the hanger perpendicular to the door, additional space for the guide rail must be taken into account.
Each department for storing certain items has its own dimensions. This is how shelves with a width of 0.5 meters and a height of 0.35 meters are made for the bedding department. If long clothes are hanging in the wardrobe, then the height of the compartment should be at least 1.75 meters, and a height of 1.3 meters is enough for a short one. It is important to set the width of the department at least 0.5 meters so that the corners of the hangers do not rub against the walls.
It is very important to set the width of the departments correctly. To do this, it is necessary to take into account the overlap of the width of the opening and the door leaves. With two doors, you can open no more than half of the opening, with three less than a third of the entire width.
The size of the door overlap depends on the selected profile. For an aluminum profile, the overlap will be about 3 centimeters. Therefore, the calculations take into account the width of the opening, the overlap and the number of door leaves. The height of the doors will be the same as the cabinet opening.
In any wardrobe, you will definitely need drawers, under which you will need to leave space. When opening, the drawer should not be at floor level. Therefore, a gap of at least 1 centimeter will have to be provided under the bottom drawer. There are recommended sizes for each type of item. So a drawer no deeper than 20 centimeters will be convenient for underwear. To keep the drawer handles out of the way, you should install built-in ones.
It is important to correctly calculate the presence of additives for fasteners. They should be at least 5 centimeters away from the edge. tsescort.org/trans/france/paris/
